As the weather warms up, it’s a great time to get your garden set up for planting and consider anything you can do to make the most of your space. That said, new garden features and updates can quickly get expensive. If you’re not aiming for a total landscaping redo, there are plenty of DIY garden upgrades you can undertake for less than $100.
Direct your climbing plants with an expandable lattice
Table of Contents
To train climbing plants along a fence line, the edge of a porch, or along the side of a pergola, you can use an expandable lattice ($36.98/ 13 by 78 inch section) to fit your lattice to your desired space. An expandable lattice can also be hung vertically along a post to train vines upwards. The lattice will shrink to a narrower, three or four foot section if you have a smaller stretch with no cutting necessary.
Build an arched trellis
To build a dreamy arched trellis for your climbing plants, you can use galvanized welded fencing ($50.52 for a 3 foot by 50 foot section) attached to t-posts ($6.98/each). Drive the t-posts into the ground, three feet apart, on either side of your intended arch, then unroll your galvanized fencing over the posts, creating an arch connecting the two sides. Use the built-in metal clips or some wire ($5.93/250 feet) to attach the fencing to your posts.
Make a hula hoop trellis
You can also make a climbing trellis using hula hoops ($21.99/10), a garden stake ($26.99/25), and some twine ($4.99/400 feet). By tying the hula hoops to the garden stakes using twine, you can suspend them in the air. The hula hoops are adjustable, so you can create a graduated trellis for climbing plants by arranging them with the smallest hoops at the top and the largest at the bottom. You can also arrange the hoops vertically by hanging them from a stake, post, or fence to make a circle trellis for climbing flowers.
Use pavers to build your raised beds
One of the cheapest and most popular ways to make raised beds is by using concrete patio pavers ($.48/each for a seven-inch by three-and-a-half inch by one-and-three-quarter-inch paver). You can stack the pavers in rows like bricks around the area of your bed to create an edge, then fill it with your own compost. The advantage of a paver-bordered garden bed versus a traditional box is that you can shape it however you like, or account for an existing slope in your garden.
Make a stock tank raised bed
Stock tank raised beds ($49.99 for one five-foot by three-foot by one-foot bed) are a popular choice for DIY raised beds because they’re durable and simple to install. Using a metal raised bed is a lighter and leaner alternative to wooden framed beds, but they can be susceptible to heat, so keep that in mind when choosing what to plant in them.
Make raised beds with cedar boards
A raised bed is simple to build using cedar boards ($9.25/each for a three-quarter inch by eight-foot by four-inch board), “l” brackets ($3.48 each), ¾ inch screws ($6.87/box), and 1 ⅝ inch screws ($10.97/box). Cut your boards to the desired length for each side of your bed, then screw the ends onto the sides of the bed using the 1 ⅝ inch screws. Use the ¾ inch screws to add “l” brackets to the inside of each corner to reinforce the joints. If you want a taller bed, use a piece of board cut to the desired height at each corner to join the boards vertically.
Make a mobile planter using a cart
You can use a metal cart ($37.02) and some flower pots ($13.99/three) to make a rolling planter/plant stand for your porch or patio. You can also use a thrifted piece of furniture and add your own castors ($11.99/four) to create a cart. A rolling planter can make it easier to water and maintain your plants, and ensure they get the right amount of sunlight.
Use a mold to make a pathway
If you want an cheaper concrete pathway, you can use a paver mold ($25.29/two) and some concrete mix ($21.88/ten pounds) to pour your own pavers. Using a mold allows you to create a path in the shape you want and save some money doing it. You’ll need some basic concrete tools ($14.99) for this project if you don’t already have some.
Make a path with mulch
To make a mulch pathway, first, define your path by staking some landscape fabric over the intended area using landscaping staples ($9.99/50). Once you have your path laid out, you can either lay down store-bought mulch ($4.97/two cubic feet), or you can use free mulch from Chip Drop. (Just be aware that Chip Drop will leave your mulch in a parking space or driveway and it will be up to you to move it to your desired pathway area.)
Plant a container garden
To create some different layers, you can try a container garden. You can use almost any type of container, but something like this stainless steel tub ($54.99), this terracotta pot ($21.44), or this concrete planter ($38.41) will be durable outdoors. SOme gardeners have success upcycling old cooking pots, tool boxes, and paint cans into containers for garden plants as well. Really anything that will hold some dirt and stand up to the elements is a good candidate for a low cost planter.